Experience: The Temperature Of Workshop Is Not Lower Than That Of Outdoor.

Speaking of High temperature operation Most people think of outdoor work for the first time. Little did I know. Textile workshop The temperature is usually higher than 2 degrees Celsius outside, and the heat is more difficult because of the relatively confined space.

Yesterday morning, the reporter walked into the Hongyang Textile Co., Ltd., which was located at Dang Shan, and experienced the textile operation under the high temperature. When the reporter explained his intention, Zhu Zhu, the director of the workshop, smiled and said, "now we have air-conditioning in our workshop. It is not very hot compared to the workshop without air-conditioning, but the highest temperature in some textile workshop can reach 38 degrees Celsius."

Although the air conditioning is installed, once the reporter enters the workshop, he immediately feels a heat wave coming to him. After entering the workshop, the first thing that came to my eyes was a huge row of textile machines, making a rumble. The hands of the textile workers were working methodically like playing the piano. Barometer and thermometer can be seen everywhere in the workshop. Sometimes, some workers use brooms to clean up the cotton wadding, and sprinkle some water on the floor to cool down.

Although the weather is hot, most of the workers in the workshops are wearing trousers, and some even wear long sleeves. After careful inquiring, it was known that the workers worked in the workshop for half an hour, and the sweat on their bodies would stick to the cotton wadding floating in the air, causing the skin to itch and sometimes to get a red rash.

Subsequently, the reporter followed the director of the workshop to "equipment" - a hat and an apron, and arranged in the air spinning wheel room to become a "probationary truck driver". "Wearing a hat is hot, but it's a safety measure to prevent women's hair from being swept into the machine. If you were a boy, you wouldn't need to wear a hat. " Director Zhu smiled and explained.

The work responsibilities of the truck operator are simply responsible for the wiring head, once discovered. yarn If it is broken, connect the yarn immediately, so that the machine can run normally. Not long afterwards, the reporter found that this work seemed easy, and it was really difficult to do it. There are 12 steps to complete the whole wiring terminal, but only 6 seconds. If it is not completed within the specified time, the connection will fail and it needs to be connected again. With the concentration of attention, about 10 minutes passed, the reporter felt that his mouth was full of sweat beads. However, the action is not standard, or it is timeout. Tension and embarrassment, the whole figure is sweating from the water.

The daily workload of the textile workers in the workshop is very heavy. Take the truck as an example, each spinning machine has 360 spindles on the spun yarn. On the average, every truck driver is responsible for 4 machines, eight hours a day, and the workers are working all the time.

In addition, Xiao Lu master, who is responsible for packing the finished products in the workshop, told reporters that every day 50 pounds of heavy bags like this had to be played 400 to 500. Even if it was too hot, it would be too late to wipe away the sweat. Just a short time after the reporter and Master Xiaolu spoke, the packing table was filled with finished products, waiting to be packed. "Sometimes when it's hot, wash it with cold water, put a cold towel on your shoulder, and occasionally wipe your sweat." Xiaolu said happily.